Image Server - Mega System Tech iCAMView iCV-01a User Manual

"Manager IP Address"
This set the IP address where the administrator can manage iCAMView from.
It is valid for up to 8 IP addresses.
addresses leave it as *.*.*.*.
"Community"
This is to set a Community name for NMS. The community name has to be the
same as that set in NMS.
"Permission"
This is to set the administrator's authority. Options are Read, Read/Write, and
No Access.
"Description"
This is for an administrator to make notes.

2.4.6 Image Server

The Image Server allows the user to view his camera directly from the internet without
having to set-up DDNS or fiddlying with his Router's NAT. All the user has to do is
log on to the Server's webpage and register for free.
Once a username and password is registered and confirmed. The user can log into
this Server from anywhere in the world and access his camera.
"Enable"
Choose "Yes" to enable this feature or "No" to disable.
"Server Name"
The current default web server is set to www.co-up.com
"Port Name"
iCAMView user manual
Chapter 5: iCAMView Web Manager
To manage iCAMView from any IP
-45-