Launch Icamview - Mega System Tech iCAMView iCV-01a User Manual

10. Click "Next >" to save and restart iCAMView with the new configurations.

2.2 Launch iCAMView

Once you have finished with the above Setup Wizard, either click "Launch iCAMView"
or double click on the iCAMView listed on the table to launch it.
Once you have done the above, the iCAMView login screen will appear. Key in the
administrator account number and password entered earlier (if you did not input one,
then just press ENTER or click on the "OK" button).
iCAMView user manual
Chapter 4: Using iCAMView Utility to Setup IP & Update Firmware
Click either one to
Launch iCAMView.
-13-