Account Settings - Mega System Tech iCAMView iCV-01a User Manual

Choose "Yes" or "No". iCAMView will automatically send the WAN IP to the
DDNS server. This ensures that DDNS is notified of your current Dynamic IP.
vi. PPPoE
Use this option to allow iCAMView to directly dial-up using your xDSL modem
and connect to the Internet. Once set-up, iCAMView will be able to stream the
video images directly to the Internet without going through a router.
"When Connection should be made"
The user has a choice of;
Disabled
Connect always
"Login Name"
Enter the login name assigned by your ISP.
"Login Password"
Enter the password assigned by your ISP.

2.3.3 Account Settings

This section allows you to set up to Eight (8) user account with different permissions
for iCAMView.
i. User Account
"User Name"
Determine the username of visitors who can log in. The administrator can set up
to 32 case sensitive character names.
"Password"
Set a password for the visitor's account. The administrator can set up to 32
case sensitive passwords.
"Permission"
Determine the permission level to one of "Administrator", "Operator", "Viewer" or
"No Access"
Administrator:
iCAMView user manual
Fig.25. iCAMView PPPoE setting
: Default setting. iCAMView does not dial in
: iCAMView will automatically dial in.
An Administrator has full access including write
permission to all sections. Only an Administrator
can see the "User Name" and IP details or set the
"Permit Hours" for Camera viewing to Operator or
Viewer accounts.
Chapter 5: iCAMView Web Manager
-29-