Ferno CCT Six - M User Manual
  1. Manuals
  2. Brands
  3. Ferno Manuals
  4. Medical Equipment
  5. CCT Six - M
  6. User manual

Ferno CCT Six - M User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CCT Six - M
User Manual
Rev 4, 3/11/21
Stock code 2003-0098
IMPORTANT NOTE
To comply with EN 1789, the patient body harness and leg straps MUST
be used at all times to hold the patient on the trolley and the trolley MUST
be secured in the vehicle with the 2-part locking device.

Advertisement

Table of Contents
loading

Related Manuals for Ferno CCT Six - M

Summary of Contents for Ferno CCT Six - M

  • Page 1 CCT Six - M User Manual Rev 4, 3/11/21 Stock code 2003-0098 IMPORTANT NOTE To comply with EN 1789, the patient body harness and leg straps MUST be used at all times to hold the patient on the trolley and the trolley MUST...
  • Page 2 However, Ferno trolleys are designed to be compatible with either the Ferno range of Two- part locking devices or competitors equivalent locking devices, giving you full compatibility and interchangeability across your fleet.

  • Page 3: Technical Data

    If foot-end Fixed platform fitted, then 40kg on trolley base and 40kg on foot-end platform. Total Gross Mass not to exceed 430 Kg (Patient + Equipment + Trolley) Construction Materials Powder Coated Steel (with antibacterial properties) Aluminium Tubing Aluminium Castings Plastic Injection Mouldings FERNO/MAN/1121/177-R04/UK Page 2...
  • Page 4 Checking the trolley The following checks are recommended before the start of each shift's use of the Ferno Trolley. 1. Does the trolley have a properly installed mattress and patient restraining system? Check the mattress for damage; if any damage is found, it must be replaced. (Please refer to page 11 for fitting instructions) 2.

  • Page 5: Important Notes

    BS EN 1789, which is considered as ‘best practice’ for safety within ambulance transport. We can confirm that provided the unit is locked into the Ferno two- part locking device, the trolley retention will meet the requirements of this standard.

  • Page 6: Operating Procedure

    5. Ensure that the harness and restraints are fastened around the patient (see page 10). 6. The cot sides are provided for patient comfort and must not be used for lifting or manoeuvring the stretcher. FERNO/MAN/1121/177-R04/UK Page 5...
  • Page 7 The foot end will automatically lock when the trolley is in the correct position. 2. Ferno UK Ltd set the locking function of each trolley before leaving the factory, this function is set to a nominal setting to accommodate all two-part locking devices. To...
  • Page 8 4. Guide the trolley on to the tail lift, head end first making sure the cotsides clear all lift components. IMPORTANT NOTE Ensure the stretcher is secure at all times when on board the tail lift FERNO/MAN/1121/177-R04/UK Page 7...
  • Page 9  Re-tighten the conical locking devices, test for security & safety. 3. Installation of Foot End Lock Assembly Install foot end lock assembly in exactly the same way as above adjacent to the positional guide plate at the foot end. FERNO/MAN/1121/177-R04/UK Page 8...
  • Page 10  Test for security and safety. PEGS  TRACKING DEVICE LOCKED 3 Installation of Foot End Lock Assembly Install foot end lock assembly in exactly the same way as above adjacent to the positional guide plate at the foot end. FERNO/MAN/1121/177-R04/UK Page 9...
  • Page 11 7. Fasten the two leg restraints and adjust to ensure patient comfort. 8. To release the harness, twist the buckle lever or depress the buckle release. Illustration purposes only. NOTE To remove the four-point harness, unclip all six brackets from mounting pegs. FERNO/MAN/1121/177-R04/UK Page 10...
  • Page 12 1. Insert the two pegs through the keyhole slots in the Leg Rest Panel, and slide mattress towards the foot end (see Fig 2 and Fig 3). Please note that should a peg not fit a slot the peg will need checking for any damage Fig 2 Fig 3 Insert Slide FERNO/MAN/1121/177-R04/UK Page 11...
  • Page 13 To remove the mattress the trolley should be flat. Remove four plastic plugs from keyhole slots and disengage the four pegs from the keyhole slots, starting with the two at the head end. FERNO/MAN/1121/177-R04/UK Page 12...
  • Page 14 A vehicle CEN tested stowage bracket, for the headrest, is also available. Storage A small storage cupboard may be provided for documents upon request. FERNO/MAN/1121/177-R04/UK Page 13...
  • Page 15 (to avoid sudden movement). Squeeze the control lever under the legrest panel with the other hand. Raise the legrest to the desired angle and release the lever to lock it in position. Support the legrest while making adjustments. NOTE: Potential pinch point - care should be taken during operation FERNO/MAN/1121/177-R04/UK Page 14...

  • Page 16: Servicing, Cleaning And Maintenance

    This Service Schedule has been created to provide protection for the patient and users of this equipment. Failure to take the correct measures may have serious consequences. Minimum Maintenance Intervals Disinfecting • Cleaning • • • • Inspecting Lubricating • Maintenance • Service FERNO/MAN/1121/177-R04/UK Page 15...
  • Page 17 1. Spray the restraint webbing metal buckles and fixation clips with disinfectant cleaner spray, following the disinfectant manufacturer’s instructions for application method and contact time 2. Hang the restraints to air-dry if needed. Attach only dried restraints to the equipment FERNO/MAN/1121/177-R04/UK Page 16...
  • Page 18 Trolley maintenance lubrication Your Ferno CCT trolley will work efficiently and safely only when it is well lubricated. You MUST lubricate all moving and sliding parts after every inspection or preventative maintenance programme, or if there is inadequate lubrication for the moving parts to operate easily and quietly.
  • Page 19 Ferno Trolley General Inspection Checklist  Check that the trolley has a properly installed mattress and complete set of patient restraints (upper body and legs)  Are all other components and accessories present?  Is the trolley generally free of excessive wear? ...
  • Page 21 Ferno Trolley Service Log Trolley Model Serial Number Date placed into operation Date of No. of Remedial work carried out / Comments Name Service lifts...

  • Page 23: Warranty

     FernoCare provide competitively priced service and inspection contracts  We offer a discount if a Ferno Service contract is taken out, you only pay once the service has been completed  Additional discounts can be offered if a 5-year contract is taken out, with a guarantee to hold the price for the effective contract period ...
  • Page 24 Ferno House, Stubs Beck Lane, Cleckheaton, West Yorkshire, England. BD19 4TZ Tel: + 44 (0) 1274 851999 Email: services@ferno.co.uk sales@ferno.co.uk www.ferno.co.uk Registered number: 1007475 England As our policy is one of continuous development Ferno (UK) Ltd reserves the right to change the specifications without notice. Stock Code: 2003-0098...

Table of Contents