Bryant 619AHB Series Service Manual page 42

SG-619AHB-01: Service Manual
DISASSEMBLY INSTRUCTIONS (CONT)
Procedure
4) Disconnect the wires.
5) Remove one screw used for the
ground connection.
6) Pull two clips of the electronic control
box along the direction shown in
the picture to the right to remove the
main control board.
If you want to repair the main control
board assembly, perform steps 1 through 6.
If you want to repair the electrical control
box subassembly, perform steps 7-10.
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Illustration
42
Ground Screw