Bosch TES 506 Series Instruction Manual page 41

en
Descaling
Duration: approx. 25 minutes.
If there is a ilter in the water
Important:
Descale required! appears
on the display, press the e off /
for 3 seconds and then press the
ton (10). The descali n g programme wi l l start.
To descale the appli a nce before bei n g
prompted, press the
at least 3 seconds. Then press the
button (13) briely twice. Turn the upper
appears in the display. To start the descaling
procedure, press the start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
●
If the water ilter is activated, the
display will prompt you to remove the ilter
Remove the ilter now if you have not
Fill descaler
Press start
●
●
Place container
Press start
●
●
All manuals and user guides at all-guides.com
j button (13)
start but -
e off / j button (13) for
e off / j
Start descaling
Descale in progress
The descaling pro gramme will now run for
about 20 minutes.
Clean / Fill water tank
Press Start
● Rinse the water tank (17) and reill it with
●
Descale in progress
The descaling pro gramme now runs for
about 3 minutes and rinses the appliance.
Empty drip tray
Insert drip tray
●
Replace the ilter if one is being used. The
Important: Wipe down the appliance using
a soft, damp cloth to immediately remove
any descaler residue. Such residue can
cause corrosion. New sponge cloths may
contain salts. Salts can cause rust ilm
37
TES506.. | 02/2014