Advertisement
Fitting the Base (Base only included in CC7050C)
8.
9.
10.
11.
8
Place the textile base in the BabyDen with
the printed side facing up.
Start by fitting the base to the three corners
with hinges as shown in ill. 9.
Pass the elastic of the base underneath the
BabyDen.
Slide the removable, vertical bar out of the
hinge. Hold the elastic as shown (see ill. 10),
while sliding the bar back in place.
Hereafter fit the last three corners of the
base by pulling the elastic underneath the
BabyDen and up around the hinge (see ill.
11).
Tie the ribbons around the horizontal, square
tubes of the metal sections - not around the
bars.
Advertisement
