Advertisement

Glider
Rocking Chair & Ottoman "Sand"
Model # 164100A-110
IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY

Advertisement

Table of Contents
loading

Summary of Contents for Childcare Glider Rocking Chair & Ottoman "Sand"

  • Page 1 Glider Rocking Chair & Ottoman “Sand” Model # 164100A-110 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
  • Page 2 SAFETY PRECAUTIONS Read all instructions before assembly and use of the glider rocking chair & ottoman. Keep instructions for future use. WARNING BEFORE ASSEMBLING THIS COT, READ AND UNDERSTAND THE INSTRUCTIONS. Crush and amputation hazards: A child’s hands can be trapped in moving parts of the Rocking Chair or Ottoman. Always ensure child’s hands are clear from moving parts of the Rocking Chair or Ottoman.
  • Page 3 CONGRATULATIONS Congratulations on your purchase of the Glider Rocking Chair & Ottoman “Black” This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
  • Page 4 Wainhouse Distribution on 0800 567 5000. Supplied loose in box: Ottoman Chair frame cushion Seat cushion Plastic nut Armrest pads Plastic spacer (L+R) Ottoman frame 45mm bolt There are no accessories recommended for use with this Childcare Glider Rocking Chair & Ottoman.
  • Page 5 ASSEMBLY / OPERATING INSTRUCTIONS Supplied loose in box continued: Rocker frame 42mm bolt base cover 38mm bolt Ottoman frame base cover (dome head) To assemble Chair Frame... Unfold backrest of chair frame. Insert plastic nuts into both sides of the hole in the backrest frame.
  • Page 6 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Chair Frame continued... Tighten bolt onto locating tube on armrest using Phillips head screwdriver (not included). Repeat steps 2-5 to assemble other side screw. WARNING Ensure screws are secure but not over-tightened. To attach Seat Cushion... Slide backrest cushion over the top of the seat frame.
  • Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To attach Seat Cushion continued... Hook seat cushion loops onto the pins. To assemble Armrests... Place armrest into position on the seat frame. Ensure the correct armrest is located on the correct side, as indicated by stickers on the frame and armrests.
  • Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Fabric Base Cover.. Secure cover to rear of seat frame by wrapping Velcro around rear bar as shown. Attach Velcro loops on top and bottom of rear fabric around frame as shown. Repeat for loops on other side of rear. Pass sides of cover behind frame and armrests as shown.
  • Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Ottoman... Place fabric Ottoman cover over frame of Ottoman. Turn Ottoman over, and secure Velcro loops around bottom of Ottoman frame. Place Ottoman frame onto Ottoman cushion. Secure Ottoman cushion onto frame using 38mm domed head screws.
  • Page 10 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Ottoman continued... Fasten Velcro loops on Ottoman sides around base of Ottoman frame. To adjust Back Rest... To adjust backrest, push lever down and slide base of cushion forwards or backwards.
  • Page 11 HOW TO CARE FOR YOUR CHILDCARE ROCKER AND OTTOMAN Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
  • Page 12 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 20 Calarco Drive, Distribution Derrimut, VIC, 3030 2-6 Argyle St, Morningside, Customer Service 1300 667 137 PO Box 41-014, St Lukes, Auckland, New Zealand W: www.cnpbrands.com.au Customer Service: 0800 567 5000 E: info@cnpbrands.com.au F: www.facebook.com/CNPBrands E: helpline@wainhousedist.co.nz...

Table of Contents