Advertisement
Removing Sections
37.
38.
39.
I
H
37a
(2)
Loose cap
Loose cap
40.
H
G
If you want to remove a section from the
gate you have bought, always remove the
end section(s).
Remove the removable, vertical bar by lifting
it up (1) and let the bar slide out of the
groove towards the hinge (2).
Lift off the section(s).
Remove the loose caps from the end section
(the illustration shows the end section of the
HearthGate - end section of ConfigureGate
see ill. 40).
Fitting of hinge caps /cones /covers
Depending on the number of sections remo-
ved or added, you will end up with one of the
illustrated end sections (ill. 39 and 40).
Fit the loose caps/covers (remaining caps
/covers are enclosed in a plastic bag) on
what is now the end sections according to ill.
39 and 40.
The caps/covers are enclosed in a plastic
bag. Fit these according to ill. 39 and 40.
17
Advertisement
