Advertisement
Unfolding and Setting up the BabyDen
5.
6.
7.
Top hinge
Bottom hinge
Re-fit the vertical
bar
6a
(1)
(2)
The removable, vertical bar has been fitted
in the end section by the manufacturer (see
"overview of basic gates" page 18).
Lift up the vertical bar and remove it.
Align the ends of the two parts and make
sure that the hinges drop together both on
top and bottom (see the extracts pictures of
ill. 5).
Connect the two parts by pushing the verti-
cal bars (1) up into the top hinge and let
them slide into the groove of the lower hinge
(2).
Wall mounting equipment is not included
with the BabyDen.
Should you wish to use the BabyDen as a
safety gate, follow the instructions of the
ConfigureGate and HearthGate (see index
page 3).
Note:
Should you want to attach all 6 sections of
the BabyDen to the wall, you will have to use
the enclosed loose vertical bar (J).
7
Advertisement
