Advertisement
Unfolding and Setting up the BabyDen
1.
Central
vertical bar
2.
(2)
3.
4.
6
1a
(3)
(1)
2a
Press down
Top hinge
Lift up
Cone hinge
Unpack your folded BabyDen on a stable
surface making sure the handle is on the top
side.
Separate the BabyDen into two parts by
lifting up on the centre removable, vertical
bar (see ill. 1) while sliding it sideways out of
the lower hinge (1a).
Unfold the sections:
Lift up (1) on the section with top hinges
while pressing down (2) on the connected
section (2).
It is easiest to lift up and turn the sections if
you lift and press as close to the hinges as
possible (see ill. 2).
Turn around the section (3).
The top hinges have markings intended for
setting up as a BabyDen.
In order to set up the BabyDen in a square
or a hexagon, turn around the sections, and
release when the arrow on the hinge is in line
with the marking on the top hinge.
Fold out both parts so that the sections form
a hexagon - follow the markings:
Advertisement
