Marantz RC5000i User Manual page 10

Getting Started
RC5000i displays Macro buttons.
Macro buttons play back a sequence
of up to 255 different commands (and
panel jumps, which can be pro-
grammed to give status during the
Macro).
You can always select the Macro side
of the RC5000i by tapping the menu
bar to the left of the remote icon.
Tap to select the Macro side of your RC5000i.
Using Menus to Jump to a Panel Group
1 Navigate to either the Macro (left) or the Device (right) side of
the remote by tapping the left or right menu bar.
2 Tap the Menu bar again. A menu will pop into view, enabling you
to choose which group of panels you want. If you have a large
system with more than seven groups, scroll arrows
you to select those that are out of sight.
3 After using the scroll arrows to view all of the choices, simply
tap the label of the group you would like.
Note
User Guide
— The Macro side of your
Macro Groups
When you jump to a Device, the RC5000i will change the input
of your home theater receiver/preamp (using the pull down
menus is exactly the same thing as pressing a Home button).
8
Device Groups
enable