Operating Procedure; Handling Precautions - YOKOGAWA 701933 User Manual

Operating Procedure

Handling Precautions

12
• Do not clamp bare conductors to avoid short circuits or personal injury
when the sensor head is open or measuring.
• Be careful not to damage the insulation surface of the conductor under
measurement.
• Do not short-circuit between the two measurement lines with the metal
part of the sensor unit. It may lead to a serious accident such as the
occurrence of an arc.
• Connect the power supply to the probe power terminal (option) of a
waveform measuring instrument such as Yokogawa DL/DLM series, or
use the power supply 701934 or 700938.
• Be careful of electric shock when connecting the probe to the device
under measurement.
• Read and observe the safety precautions of the instruments to be
connected to.
• To avoid electric shock, do not get the instrument wet or use it with wet
hands.
WARNING
IM 701933-01E