Attaching The Neck Strap; Operating Procedure - YOKOGAWA AQ2160-01 User Manual

Optical powermeter
Table of Contents

Advertisement

9. Attaching the Neck Strap

■ Attaching the Neck Strap
Attach the neck strap by
feeding it through the strap
attachment holes as shown
in the figure.
Do not swing the instrument by its strap. Damage or injury can result.
Also, when placing the strap around your neck, take care not to choke
or strangle yourself.

10. Operating Procedure

■ Installing the Batteries
Turn the screw on the rear panel
with a coin or other flat object to
remove the cover, then install the
batteries.
Turning the screw locks/unlocks
the cover as shown in the figure.
Insert two AA batteries into the
holder following the polarity
markings. Always close the cover
after installing batteries.
If the low battery indicator blinks, you must change the batteries
immediately. The instrument runs for approximately forty hours
when using alkaline AA batteries (depending on operating
conditions).
11
Unlock
Lock

Advertisement

Table of Contents
loading

Table of Contents