Pulser To Miwi Cable Connections - Honeywell MIWI350 Installation And Operation Manual

6 Remote Pulser

6.1 Pulser to MIWI cable connections

Follow the below steps carefully to interface the Pulsar and MIWI350.
Step 1 : Insert the interfacing cable (40-6189) from the Pulsar through the Pulse Input Gland on MIWI350
device.
Step 2 : Plug the interfacing cable (40-6189) to the 4-pin connector of the IO Board (TB2). Refer Detail L
in the Figure here.
|35