Battery Installation; Lead-Acid Battery - Honeywell MIWI350 Installation And Operation Manual

8 Battery Installation

8 Battery Installation

8.1 Lead-Acid Battery

To install a 7Ah/21Ah lead-acid battery:
1. Quarter turn the screw and open the
battery mount bracket flip cover.
3. Connect the battery cable (*) to battery
charge controller cable.
*40-6169-2 - If you are connecting a 12V 21Ah lead-acid battery for divison 2
*40-6169-3 - If you are connecting a 12V 7Ah lead-acid battery for divison 2
"# 40-6169-5 - If you are connecting a 12V 21Ah lead-acid battery for zone 2
# 40-6169-6 - If you are connecting a 12V 7Ah lead-acid battery for zone 2.
2. Carefully insert the battery in the mount
bracket.
4. Close the battery mount bracket flip cover
by quarter turning the screw.
|42