Using The Recorder; Switching On And Off; Using The Remote Control; Inserting Discs - Marantz DR-6000 User Manual

USING THE RECORDER

The numbers between parentheses refer to the fold-out.

Switching ON and OFF

1 Connect the power cord into the mains.
2 Press the POWER ON/OFF (1) button on the front of the
CD-Recorder to turn it on or off.
STANDBY
POWER ON/OFF
w

Using the remote control

1 Open the battery compartment cover.
2 Insert 2 batteries (AA, LR-6 or UM-3; as supplied) as
shown.
3 Replace the cover.
Note:
- We recommend you use 2 batteries of the same type and
condition.
- Always point the remote control directly towards the re-
corder and make sure there.
This remote control can switch "STANDBY ON/OFF" but can-
not switch "POWER ON/OFF" the CD-Recorder.
Batteries contain chemical substances, so they should be
disposed of properly.
AC IN
q
CD RECORDER DR6000
OPEN/CLOSE
Recordable
ReWritable
DISPLAY SCROLL

Inserting discs

1 Press / / / / / OPEN/CLOSE (6) to open the disc tray.
lights up.
2 Insert a CD, CD-R or CD-RW in the appropriate recess in
the tray, label side up.
3 Press / / / / / OPEN/CLOSE (6) to close the tray.
lights up, followed by
play will show the type of disc you inserted.
• If a CD-R(W) is finalized it will show CD on the display.
• If CD-text is available the TITLE/ARTIST will scroll by.
Note:
- Only Audio CDs will be accepted. If a non-audio disc is
inserted, the display shows
- For recording it is important that the blank disc is completely
free from dust particles or scratches. (see Compact Discs
page 2).
- If you insert a blank or partly-recorded CD-R or unfinalized
CD-RW, the CD-Recorder will calibrate the disc for optimum
recording. During this process the display will first show
and then the number of audio tracks.
Calibration can take up to 25 seconds.
7
and the dis-
.