Programming; Programmed Play - Marantz DR-6000 User Manual

PROGRAMMING

The numbers between parentheses refer to the fold-out.

Programmed play

• You can program up to 99 tracks to play in any desired se-
quence.
• Tracks can be programmed more than once, but each time
counts as a track. (step)
Programming for playback
1 1 1 1 1
Press PROG (72) on the remote control to enter Pro-
gram mode.
PROGRAM flashes and
2 2 2 2 2 Select the required track numbers by turning the EASY
JOG (12) key left or right and store by pressing PUSH EN-
TER (12, 65).
or:
Key in a track number with the NUMBER (57). For 2-digit
numbers, press the keys in rapid succession.
The track will be stored in the program.
The track number, total program time and the number of
programmed tracks (steps) are displayed.
3 3 3 3 3 Repeat step 2 2 2 2 2 for all tracks to be programmed.
4 4 4 4 4
Press STOP (17, 68) or PROG (72) on the remote control
to end programming.
PROGRAM lights continuously.
Press 2 2 2 2 2 /; ; ; ; ; PLAY/PAUSE (16, 60) to start programmed play.
5 5 5 5 5
1 1 1 1 1
2 2 2 2 2
•
1 1 1 1 1
appears on the display.
2 2 2 2 2
3 3 3 3 3
15
Clearing a program
Press 9 9 9 9 9 STOP (17, 68) if necessary to stop programmed
play.
Press 9 9 9 9 9 STOP (17, 68) again to clear the program.
PROGRAM disappears from the display.
The program is also cleared if you open the disc tray.
Erasing a track from a program
In Stop mode press PROG (72) on the remote control to
enter Program mode.
Q Q R R
Use Q Q Q (19, 62) or R R (18, 67) to select the track from R
which to delete.
The track number and program step will be shown on
the display.
Press CANCEL/DELETE (10, 66) to erase the track from
the program.
The remaining program steps and the remaining playing
time of the program will be displayed.