Recording; Remarks About Recording; Recording Modes - Marantz DR-6000 User Manual

RECORDING

The numbers between parentheses refer to the fold-out.

Remarks about recording

You will soon discover how easy it is to make your own CDs.
Nevertheless, it is advisable to use a CD-RW disc for your first
try.
• If the disc is a CD-RW and is already finalized you must
unfinalize it first.
• The recording procedure is the same for CD-Rs and CD-
RWs.
• If the disc already contains recordings, the CD-Recorder will
automatically search for the end of the last track, so that re-
cording can start from there.
• There must be at least 7 seconds of recording time left
on the disc, otherwise you will not be able to enter record
standby mode.
• If the display indicates
cording can be made of the source material. Recording will
not start.
• The Serial Copy Management System (SCMS) only al-
lows digital recording under specific conditions:
- This means that it is not possible to make a digital copy
from a digital copy.
- Analog recording is always possible !
- The number of recordings from the original is unlimited.
Digital
Digital
CDR,
CD
DAT
Analog
Analog Digital
CDR,
DAT
• A maximum of 99 tracks can be recorded on a disc. Minimum
allowable track length is 4 seconds.
• Recordings from DAT or DCC players will not always stop
automatically.
Important:
If you want to play the recorded CD-R disc on any regular
CD player, it must first be finalized. (See FINALIZING/
UNFINALIZING.)
Finalized CD-RW discs play only on CD-RW compatible CD
players.
then lights up.
, no digital re-
CDR,
DAT
Digital
Digital
CDR, CDR, CDR,
DAT DAT DAT
Digital
CDR, CDR,
DAT DAT
O : Can be recorded.
X : Cannot be recorded.

Recording modes

Your recorder offers several recording modes.
- - to make a synchronised recording of the
complete disc or a program simply by starting the source.
- - to make a synchronised recording of a
single track simply by starting the source.
- - to manualy start a recording simply by
pressing the REC key.
- - to make a synchronised recording of the com-
plete disc or a program simply by starting the source. Finaliz-
ing will be done automatically.
Some remarks on recording:
- When Auto track is on (default setting), track numbers will
automatically be increased during recording.
- By programming tracks first, a compilation can be recorded.
- If a finalized CD recordable disc is inserted in the CD-Re-
corder,
not possible.
- If a finalized CD rewritable disc is inserted in the CD-Re-
corder,
played when the REC TYPE (20) is pressed. If PUSH EN-
TER (12, 65) is pressed, the disc will be unfinalized.
- When you copy a special disc such as HDCD or DTS, you
have to
• set the sampling frequency at 44.1kHz.
• use the digital connection.
• set the digital rec-volume of the CD-Recorder at 0 dB.
- When you copy the tracks from a DAT recorded by different
sampling frequencies, noise might be recorded in the disc.
Please set a sampling frequency for every track in a DAT.
- This CD-Recorder can record about 17 seconds of a pause
time, which decreases the time count just before music start
in a track on the display. If you record a track including more
than 17-seconds-pause time by digital recording, the pause
time will be recorded the different length of time from original.
However, the entire track time will not be changed and be
able to listen to the music as same as original.
Warning:
No more recording possible after finalizing CD-R disc!
8
will be displayed. Recording is
and will be dis-