lefant M2 Instruction Manual page 13

2. Operating and Programming
To enjoy all available features , it is recommended to control your Robot via the Lefant Life App.
Before you start, make sure that:
• Your mobile phone is connected to a Wi-Fi network.
• The 2.4GHz band wireless signal is enabled on your router.
Download and Install App
Method 1: Scan the QR code, download and install the App
according to the prompts.
under the cover
Method 2: Search for "Lefant Life", download and install.
Lefant Life
/2.4 App Download
IOS 9.0 or later Android 4.0 or later
Add device & Pair the network through the app
Open the "Lefant Life" APP and log in (new users need to register first).
Select <Add device> on home page. Then pair the network following
the detailed instructions in the app.
Reset the device
If you experience with network pairing failure, please reset the device.
1. Turn on the power switch on your robot.
2. Press the button on your robot for 3 seconds to enter EZ network
pairing mode (robot gives 1 beep); press it for another 3 seconds to enter
AP network pairing mode (robot gives 2 beeps).
Indicator light
• Wait for connection: EZ mode: blue light flashing rapidly
• Connecting / Wi-Fi connected: solid blue
Notes:
- This device only supports 2.4GHz Wi-Fi network.
(not compatible with 5GHz Wi-Fi)
- If you experience with network pairing failure, please restart the
robot and start over again. Or try the other network pairing method
instead (touch on the upper right corner).
12
AP mode: blue light flashing slowly