Related Manuals for lefant M57
Summary of Contents for lefant M57
- Page 1 M 57 User Manual Robotic Vacuum Cleaner (Applicable for： M570/M571) Please read the instructions carefully before using this product and keep it properly...
- Page 2 Instruction Manual, please contact our Customer Service Center where atechnician can address your specific problem or question. For more information, please visit the Lefant ROBOTICS official website: www.lefantlife.com or send email to service@lefant.com.cn The Company reserves the right to make technological and/or design changes...
-
Page 3: Table Of Contents
Contents 1.Important Safety Instructions ···················· 3 2.Product Composition ·························· 3.Product Operating and Programming ············· 3.1 Notes Before Cleaning ······························· 3.2 Quick Start ········································ 3.3 Cleaning Mode Selection ····························· 3.4 Scheduling setting ··································· 3.5 Mopping function ··································· 4.Maintenance ································· 4.1 Dustbin and Filters ································ 4.2 Water Tank Assembly ·······························... -
Page 4: Important Safety Instructions
28. When not using the Charging Dock for a long period of time, please unplug it. 29. The Appliance must be used in accordance with the directions in this Instruction Manual. LEFANT ROBOTICS cannot be held liable or responsible for any damages or injuries caused by improper use. -
Page 5: Product Composition
2.Product Composition Robot Wi-Fi Start / Pause Indicator Light button / Recharge Mode key / Timed cleaning water volume button adjustment Universal Wheel Anti-drop Sensors Anti-drop Sensors Charging Contacts Charging Contacts Side Brushes Side Brushes Anti-drop Sensors Anti-drop Sensors Driving Wheels Driving Wheels Dust Bin/Water Tank （Applicable for M571）... - Page 6 2.Product Composition Charging Dock Cleaning Tool Power Indicator Light Power Adapter Charging Dock Pins Power Adapter Port Remote Control Week display bar clock icon Clock time display Schedule time display Appointment icon Mode status display AUTO Mode Button Return to Charger Mode Button Direction Control Button START/PAUSE Button...
- Page 7 2.Product Composition Dustbin Filter Net Sponge Filter Dustbin Cover High Efficiency Filter (HEPA) Dust Bin Dust Bin Release Button Water Tank （Applicable for M571） Water Tank Water Tank Relea se Button Water Tank Sealing Plug Mop pad...
-
Page 8: Product Operating And Programming
3.Operating and Programming 3.1 Notes Before Cleaning Please refer to the following guidelines to check the cleaning area before using the robot. Remove power cords and small objects from The product is not suitable for use on long- theFloor that could entangle the products. pile carpet. -
Page 9: Quick Start
3.Operating and Programming 3.2 Quick Start Charging Dock Placement Connect the adapter to the charging Dock Place the Charging Dock on a level floor surface against the wall with the base perpendicular to the ground. Keep the immediate area 2m (6.6’ ) in front of the charger and 1 m (3.3’ ) on bo thsides of the charger clear of objects and reflective surfaces.Plug the Charging Dock in. - Page 10 3.Operating and Programming Start to Charge Turn on the Robot Turn the robot’ s Side Power Switch to the ON position. “-” indicates ON and “O” indicates OFF. Robot is powered ON when button glows acontinuous BLUE. Charge Robot Place robot on the Charging Dock making sure the Charging Contacts on robot and the Charging Dock Pins make a connection.
- Page 11 3.Operating and Programming Start Cleaning Press the button on Robot or the Button on the Remote Control. robot starts to work immediately in Cleaning Mode. Pause Pause robot by pressing the button on robot or the button on the Remote Control， The robot will enters sleep mode after standby for 10 minutes, and the button.
- Page 12 3.Operating and Programming 3.3 Cleaning Mode Selection The Robot has Three cleaning modes to choose from to effectively clean different floors.Cleaning modes are selected using the Remote Control. Standard cleaning mode (planned path cleaning once, default mid suction power) Press the mode selection button (on the robot’ s top panel or the remote control ) to switch to the standard cleaning mode, and then press the start button (on the robot’...
-
Page 13: Cleaning Mode Selection
3.Operating and Programming According to different cleaning scene requirements, to achieve rapid cleaning, this product is equ ipped with two kinds of cleaning functions. Spot Cleaning Mode This mode is applicable for an area of highly concentrated dirt or duct. In Sport Cleaning Mode, Robot focuses on a specific area to clean. -
Page 14: Scheduling Setting
3.Operating and Programming 3.4 Scheduling setting In order to meet different needs, robot includes three time scheduling function: One-click time sch eduling on on the robot or remote control time scheduling and APP time scheduling. One-click time scheduling (set the current time to the daily cleaning time) Press the Robot ( ) button for 2 seconds, the robot will send a tone to indicate that the setting is successful, the robot will Start... - Page 15 3.Operating and Programming Schedule the Cleaning Time using Remote Control press button, the icon and the weekcolu Press the Buttons to switch “hour” “minute” mn area flash on the Remote Controlscreen. and “week” . Press the Buttons to adjust “hour” , “minute” and “selected day of the week". After the scheduled cleaning time is adjust, align theremote control with the robot, press the button...
-
Page 16: Mopping Function
3.Operating and Programming 3.5 Mopping Function （(Applicable for M571） This product is equipped with a water tank assembly. After the cleaning work is completed, ifthere is a demand for mopping, the Dustbin can be replaced with a water tank assembly. Forthe cleaning method, please refer to the [Maintenance] section in this manual. -
Page 17: Maintenance
4.Maintance 4.1Dustbin and Filters When cleaning and maintaining the robot and its accessories, turn off the robot and unplug the Charging dock. Remove the dustbin, open the dustbin cover,and empty the dustbin； Remove dust filter. HEPA is not recommended for washing. Pat the high efficiency filter clean. -
Page 18: Water Tank Assembly
4.Maintance 4.2 Water Tank Assembly (Applicable forM571) Cleaning the Water tank Remove: After the mopping is completed, remove the water tank assembly and remove the Mop pad. Cleaning the water tank Empty the remaining water in the tank and dry it or air drying natural. -
Page 19: Roller Brush And Side Brush
4.Maintance 4.3 Roller brush and side brush Cleaning Roller Brush Turn the robot over. Push both buttons on the Roller Brush Cover and remove it. Remove the Roller Brush.Use the Multi-Function Cleaning Tool to cut off and remove any hair tangled around the Roller Brush. Use the Multi-FunctionCleaning Cleaning the Side Brushes Tool to cut off... -
Page 20: Other Components
4.Maintance 4.4 Other Components ■ Clean the anti-collision sensor ■ Wipe the Anti-Drop Sensors with panel. the brush or the felt side of the Mu lti-Function Cleaning Tool to maintain their effectiveness. ■ Wipe the Charging Contacts and Charging Dock Pins with the brush of the Multi-Function Cleaning Tool or a dry clean cloth to maintain their effectiveness. -
Page 21: Indicator Light
Please connect to 2.4G WiFi signal. Please scan the QR code in the user manual or Download the incorrect APP search "Lefant life" on google play or app store. It is recommended to clean and maintain the Side brush, rolling brush,entangled, brush, roller brush,dustbin and filters regularly. - Page 22 If the trouble cannot be eliminated according to the above operation, Please contact service@lefant.com.cn The images are only for reference, please refer to the actual item as the standard. Lohas reserves the right to update products without prior notice.
-
Page 23: Technical Parameters
7. Technical Parameters Robot Model： M570/M571 Working Voltage: 12.8 V Power Rating: 25 W Cleaning Time Max. 180 mins Charging Stand Rated Input Voltage: 18V Rated output current: 2A... - Page 24 Official website Shenzhen Lohas Technology Co.， LTD http://www.lefantlife.com / service@lefant.com.cn Part of the eastern section, level 4 Building 3 Factory, Longcheng Industrial Park, Huanggekeng Community, Longcheng Street, Longgang District, Shenzhen, China M57-LH20200720...