First Use - Advantech SmartStart Series Start Manual

First Use

Before applying power to the router, connect all the components you need for your appli-
cations.
Do not run the router without an antenna connected to the main antenna connector. The
energy from the transmission is effectively reflected by the open end and can damage
the equipment.
1. Antenna
Use SMA connectors to connect the antennas to the router; see the figure below. The main
antenna is connected to the ANT connector. Next, connect the second diversity antenna to
the DIV connector to improve the quality and reliability of a wireless link.
2. SIM card
The SIM card reader for two mini-SIM cards (2FF with size of 25.0 x 15.0 x 0.76 mm)
is located on the router's rear panel. If you intend to use this device to communicate over
a cellular network, please place an activated data-provisioned SIM card into the SIM card
reader. Push your SIM card into the SIM1 or SIM2 slot until it clicks into place. You can install
two SIM cards simultaneously to utilize the SIM card switching feature.
QSG-0002-EN, March 3, 2022 5 Released in the Czech Republic
SmartStart