Charcoal Filter - Bosch DWW063461 Instructions For Installation And Use Manual

Hide thumbs Also See for DWW063461:
Table of Contents

Advertisement

Available languages

Available languages

Filters and maintenance
Installation and removal of metal filters:
Push inwards the locking handles of the filter and pull it down.
1.
2. Clean the filters.
3. Fit the grease filters.

Charcoal filter:

For vapor filtering in recirculation mode.
Attention:
An excess of grease in the filter not only would cause fire, but
can also affect the performance of the hood.
Installation:
Place the filter is such a way that it covers the motor
slot.
R pins in the slots should correspond to the holes
S, turn clockwise until you hear the distinctive
click.
7
Removal:
Remove the filter by reversing the above described operation.
❑ The charcoal filter lasts for a long time, depeding on the type
of cooking and the frequency of metal filter cleaning.
In any case, it is necessary to replace the filter every 4
months.
The charcoal filter can't be neither washed nor restored.
❑ The charcoal filter can be purchased in a SPECIALISED
SHOWROOM.
(See «Specialised accessories»).
To ensure proper functioning of the cooker hood, use only
original charcoal filters.
Use of old charcoal filters:
Charcoal filters do NOT contain hazardous substances.
Therefore they can be disposed as regular household
waste.
R
R
S

Advertisement

Table of Contents
loading

Table of Contents