Electrical Connection - Bosch DWW063461 Instructions For Installation And Use Manual

Electrical connection

Mains voltage should correspond to the voltage indicated on the
rating plate found inside the hood. If the hood is equipped with a
plug, connect it to a plug connector which meets the applicable
regulations and is easily accessible. If the plug is not applicable
(direct connection to power supply), or if the plug connector is
not accessibile – use the appropriate bipolar switch providing
complete disconnection from the power supply in case of
overvoltage of category III, according to the installation
instructions.
Attention: before connecting the hood to the mains
supply and test its proper functioning, make sure that
power cable is connected properly.
13