Related Manuals for Regulus R0BC 200
Summary of Contents for Regulus R0BC 200
- Page 1 Installation and Operation Manual HOT WATER STORAGE TANKS R0BC 200, R0BC 300, R0BC 400, R0BC 500, R0BC 750, R0BC 1000, R0BC 1500, R0BC 2000, R0BC 2500 a R0BC 3000 R0BC 200 - 3000...
-
Page 2: Table Of Contents
6.4 Connection to water mains ....................6.5 Electronic anode rod installation ..................6.6 Commissioning ........................7 Tank Insulation ..........................8 Maintenance, Replacement of Magnesium Anode Bar ..............9 Disposal ............................10 Warranty ............................REGULUS - R0BC Hot Water Storage Tanks - www.regulus.eu │... -
Page 3: Description
Hot water temperature should be kept between 60 and 65°C. This temperature guarantees the optimal opera- tion of hot water storage tanks and at the same time, it prevents formation of Legionella bacteria. REGULUS - R0BC Hot Water Storage Tanks - www.regulus.eu │... -
Page 4: Technical Data And Dimensions
The lower flange contains an anode rod in tanks: R0BC 1500 - R0BC 3000 Total tank volume: ..............a [l] Max. working temperature - tank: ..........95 °C Max. working pressure - tank: ........... 10 bar Empty weight: ................b [kg] REGULUS - R0BC Hot Water Storage Tanks - www.regulus.eu │... - Page 5 G 5/4“ F 1240 G 5/4“ F 1675 G 5/4“ F 1656 G 5/4“ F 1742 G 5/4“ F 1800 G 5/4“ F 2069 G 5/4“ F 2205 G 5/4“ F 2470 G 5/4“ F 2600 G 5/4“ F 2900 G 5/4“ F 520 G 5/4“ F 550 G 5/4“ F 640 G 5/4“ F 640 REGULUS - R0BC Hot Water Storage Tanks - www.regulus.eu │...
-
Page 6: Typical Installation Example
5 - Typical Installation Examples DHW heating by solar collectors, auxiliary heating by an el. heating element REGULUS - R0BC Hot Water Storage Tanks - www.regulus.eu │... -
Page 7: Installation And Commissioning
In order to prevent water loss, an expansion vessel should be installed at the cold water inlet as well (8 l volume for R0BC 200, 12 l volume for R0BC 300, 18 l volume for R0BC 400, 24 l volume for R0BC 500, 35 l volume for R0BC 750, 50 l volume for R0BC 1000, 80 l volume for R0BC 2000, 100 l volume for R0BC 2500 and 2×60 l volume for R0BC 3000). -
Page 8: Commissioning
Fill the heating circuits with the appropriate fluids and air-bleed the entire system. Check all connections for leaks and verify the system pressure. Set the heating controller in compliance with the documentation and manufacturer’s recommendations. Check regularly a proper function of all control and adjusting elements.. REGULUS - R0BC Hot Water Storage Tanks - www.regulus.eu │... -
Page 9: Tank Insulation
○ defects caused by mechanical damage to the product, ○ defects caused by tampering or incompetent repair. REGULUS - R0BC Hot Water Storage Tanks - www.regulus.eu │... -
Page 10: Maintenance, Replacement Of Magnesium Anode Bar
8 - Maintenance, Replacement of Magnesium Anode Rod If the tank is fitted with a heating element, disconnect it from the mains first. Clean the exterior of the tank with a soft cloth and a mild detergent. Never use abrasive cleaners or solvents. Check all connections for leaks. - Page 12 ©2022 We reserve the right to errors, changes and improvements without prior notice. REGULUS spol. s r.o. E-mail: sales@regulus.eu Web: www.regulus.eu...
Need help?
Do you have a question about the R0BC 200 and is the answer not in the manual?
Questions and answers