Take A Photo; Record A Video - Honeywell CT40 User Manual

Take a Photo

1. Tap the Camera icon
2. Using the screen as a viewfinder, move the computer until you see the image
3. The camera automatically adjusts the focus but you can tap the screen to
4. Tap
Note: On CT40 XP models, select
front camera does not include a Flash feature.CT40 models do not include a front
camera.

Record a Video

This section explains how to record video with the camera in the computer.
1. Tap the Camera icon
2. Tap
3. When you are done recording, tap
To access the video settings in the Camera app, select the More Settings icon
and then Advanced Settings
56
you want to capture.
modify the focal point. By default, the camera senses the lighting in the
environment and turns the flash on, if needed.
the Volume button to take a photo.
• To view the picture, tap the preview near the bottom of the screen.
• To return to the Camera app, tap the Back navigation button.
to start recording video.
• To zoom in or out, pinch or spread your fingers apart.
• To toggle sound recording on or off, tap the microphone icon at the top of the
screen.
• To pause recording, select
• To capture a still picture during recording, tap the Camera icon
• To add light while recording, tap the flash icon. Flash is only available with
the rear camera on the back of the computer.
in the favorites tray on the Home screen.
to switch between the front and rear camera. The
in the favorites tray.
. To resume recording, tap
.
.
CT40/CT40 XP Mobile Computer Series User Guide
.
.
,