Bat Commands Examples; C Declaration Of Conformities - u-blox SARA-N3 Series User Manual

EVK-N3 - User guide
B AT commands examples
For the complete description and syntax of the AT commands supported by SARA-N3 series modules,
see the SARA-N2 / SARA-N3 series AT commands manual [1].
For detailed AT commands examples for network registration and configuration, context activation,
data connection management, SIM management, module interfaces configurations and other
settings, see the u-blox SARA-N3 application development guide [4].

C Declaration of conformities

The equipment is intended for indoor usage. It is the user's duty to verify if further restrictions apply,
such as in airplanes, hospitals or hazardous locations (petrol stations, refineries...).
Any changes or modification made to this equipment will void its compliance to the safety
requirements.
Maintenance, inspections and/or repairs of the EVK-N3 evaluation kits shall be performed by u-blox
AG.
UBX-19004195 - R06 Appendix Page 13 of 17
C1-Public