Xebex Fitness ROWER SMART CONNECT 2.0 BA+ Manual page 9

HRM – Heart Rate Monitor Connection
7.
(1). SET HRM Setting Procedure for Bluetooth or Ant+ connection
(2). BLUEBOOTH or ANT+ wireless Connection
(3). How to use BLUEBOOTH wireless Connection
Under the "STAND BY" mode, press and hold the
1.
"RESET" key for 3 seconds to display SET HRM
program.
After pressing the ENTER key, 4 metrics (time,
2.
strokes, calories, distance) will be flashing.
Please use the "UP / DOWN" button to cycle choose the
After displaying SET HRM for 2 seconds, the screen
1.
will switch to the screen as the left drawing.
Connect to the corresponding wireless chest strap via
2.
Bluetooth or ANT+ serial number
If there is a signal to successfully connect to the
3.
Bluetooth or ANT+ wireless chest strap, the screen will
display as shown in the drawing on the left.
If you are using a Bluetooth wireless chest strap, the
1.
console will display "BLE" on the screen as shown in the
drawing on the left.
Pressing the ENTER button, then the PULSE section
2.
on the screen will display "b" as shown in the drawing on
the left.
The Bluetooth wireless chest strap has been
3.
successfully connected to the console now.