Race - Program - Xebex Fitness ROWER SMART CONNECT 2.0 BA+ Manual

RACE - PROGRAM

2.
(1). METERS Setting Procedure
(2) TIME/500M Setting Procedure
(3). Press START key to begin the program
3. If you stop rowing, the time display will pause the counting as well, when you start rowing again, Time will
continue to count from the last number you pause.
4. Press the STOP button to pause the monitor.
1. Under MENU mode, use the "UP / DOWN" key to select
RACE, and then press the ENTER key to confirm the program.
1. Once you select the RACE program, the program defaults to a
2000 meter distance.
2. Users can use the "UP / DOWN" button to change the RACE
distance and press the ENTER key to confirm the setting.
1. Once your target race distance is set, the program defaults to a
2:15 TIME / 500M setting.
2. Users can use the "UP / DOWN" button to change the "TIME /
5000M" settings and press the ENTER key to confirm the setting.
1. During the RACE program, the following metrics "TIME /
STROKES / CALORIES / WATTS /" will count up, but RACE
metric will count down to your target race distance.
2. During the workout, the dot matrix on the display will show the
current status for both of YOURS and the COMPUTER's. After
the race is over, the computer will show either the COMPUTER
or YOU as the winner.