Operator Safety - Alliance Laundry Systems HC18MC2 Manual

https://appliancetechmanuals.com

Operator Safety

NEVER insert hands or objects into
basket until it has completely stopped.
Doing so could result in serious injury.
To ensure the safety of machine operators, the
following maintenance checks must be performed
daily:
1. Prior to operating the machine, verify that all
warning signs are present and legible. Missing or
illegible signs must be replaced immediately.
Make certain that spares are available.
2. Check door interlock before starting operation of
the machine:
a. Attempt to start the machine with the door
open. The machine should not start with the
door open.
b. Close the door without locking it and attempt
to start the machine. The machine should not
start with the door unlocked.
c. Close and lock the door and start a cycle.
Attempt to open the door while the cycle is in
progress. The door should not open.
If the door lock and interlock are not functioning
properly, call a service technician.
3. Do not attempt to operate the machine if any of
the following conditions are present:
a. The door does not remain securely locked
during the entire cycle.
b. Excessively high water level is evident.
c. Machine is not connected to a properly
grounded circuit.
F232133
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Do not bypass any safety devices in the machine.
Never operate the machine with a
bypassed or disconnected balance
system. Operating the machine with
SW012
severe out-of-balance loads could result
in personal injury and serious equipment
damage.
Safety Information
WARNING
SW039
5