Table of Contents
Advertisement
Table 11-4
Format of station status 3
Bit
0 to 7
0: Bits are always set to "0".
Master PROFIBUS address
The PROFIBUS address of the specific DP master that configured the Compact FF Link FF
and that has reading and writing access to the Compact FF Link FF is stored in byte 3 of the
default diagnostics.
Device identifier
The device identifier is a code that uniquely identifies the DP slave (PROFIBUS ID number).
Table 11-5
Format of the device identifier
Byte 4
Byte 5
81
B8
11.2.2.2
Identifier-related diagnostics
Definition
The identifier-related diagnostics specifies the slots of the bus link for which diagnostics data
is available.
Definitions of slave, module, and slot
A slave is a bus node that is addressed using its own bus address. It can consist physically or
logically of one or more modules. The slaves and their modules are mapped onto virtual slots
in the identifier-related diagnostics.
● A non-modular slave always occupies two slots.
The first slot represents a "virtual head module" and the second a "virtual module".
● A modular slave consisting of x modules occupies (x+1) slots.
The first three slots are assigned to the bus link. The following slots are assigned to the
individual modules in ascending order.
● The field device couplers in the following figure are virtual modules integrated in the
Compact FF Link.
Compact FF Link
Operating Instructions, 03/2015, A5E35651552-AA
Designation
Compact FF Link
Alarm, error, and system messages
11.2 Diagnostics of the Compact FF Link
Meaning
67
Advertisement
Table of Contents
