Temperature Adjustment; Toilet Seat, Warm Water, Drying - Toto WASHLET SN922M Instruction Manual

Temperature Adjustment

Three different temperature levels (High / Medium / Low) and "OFF" setting can be made.
Toilet seat
temperature
(When you
want to adjust
the toilet seat
temperature)
Adjusting the temperature
1
Remove the remote control from the hanger.
• If the remote control is secured to prevent theft (Page 16)
2
Choose and press the button of the temperature that you want to set
from the
temperature" button) and
• The current temperature level appears.
3
Press the button selected in step
temperature level lights up.
The setting changes each time the button is pressed once
"OFF"
OFF
• The "Drying" cannot be turned "OFF".
If the button is not pressed for about 10 seconds, the "Temperature adjustment" LED will go off , but the setting will be retained.
If the "Temperature adjustment" LED goes out before the setting is completed, start all over again at step 2.
<Settings complete>
4
Mount the remote control in the hanger.
• If the remote control is secured to prevent theft (Page 16)
*1 To prevent condensation, the water temperature does not drop below 68°F (20°C) even when set to "OFF".
 If adjusting the temperature does not warm up the toilet seat
 Is "Energy saver" set to "ON"? (Page 24)
22
Displaying the temperature
level of the pressed button
Drying air temperature
(When you want to adjust the
drying air temperature)
Warm water temperature
(When you want to adjust the
warm water temperature)
("Toilet seat temperature"button),
("Dryer temperature" button).
2
"Low"
Lit

Toilet Seat, Warm Water, Drying

When seat temperature
is set
("Warm water
repeatedly until a desired
"Medium"
Lit
Lit
<Seat>
"High"
Lit