Advertisement
Temperature Adjustment
Water outlet temperature confirmation
Make the safety button on the temperature-adjusting handle and the "40" marking on
the panel aligned in the center. Rotate the switching handle to allow the water outlet
shower to output water. Confirm that the water outlet temperature is 40℃. If not, please
adjust the water outlet temperature by following the main points below. (Take TBV02404*
as an example. The main points thereof for water outlet temperature adjustment is the
same as that for thermostat product)
Main points of water outlet temperature adjustment
Open and close switching handle
Hot water side
Cold water side
Safety button
Temperature-adjusting handle
Temperature-
adjusting handle
Small screw
Handle cover
Button
About 40℃
5
1. Allow the water outlet or shower to
output water. Rotate the
temperature-adjusting handle until the
water outlet temperature reaches 40℃.
That position has nothing to do with the
scale on the body. When rotating to the
high temperature side, please press the
safety button.
2. When pulling out the
temperature-adjusting handle, please
take out the handle cover first and then
screw to remove the small screws.
※ When removing the handle cover,
please use something with a thin
pointed end such as screwdriver, etc.
Take care not to scratch the plated coat
surface and do not allow the
temperature-adjusting handle to rotate.
3. Make the safety button on the
temperature-adjusting handle and the
"40" marking on the decorating plate
aligned in the center. Install the
"40"
temperature-adjusting handle. After
confirming that the water outlet
temperature is 40℃. , tighten the small
screws. Install the handle cover.
Using method
I. Characteristics
①Under the action of the thermostat cartridge, the water coming out can be adjusted to a
certain temperature automatically. Therefore, even if the pressure of the cold, hot water
supplied changes, the temperature almost experiences no change.
②Just adjust the temperature-adjusting handle and the desired temperature can be
reached.
③A filter net is installed to avoid sand particles or dust in the pipe coming into the
component.
④The temperature-adjusting handle has a safety button. No hot water will spray out even
in case of misoperation.
II. Names and using methods of different parts
Open and close switching handle
1. Temperature adjustment
Open and close switching handle
Hot water side
Cold
water side
Safety button
Temperature-adjusting handle
2. Safety button
Button
"40"
3. Water outlet and water stop
Shower
Water outlet
Hot water side
Cold water side
Safety button
Temperature-adjusting handle
① Rotate the temperature-adjusting handle and adjust the
desired water outlet temperature to the 40℃ marking.
The marking "40" represents the water outlet temperature
standard.
(The single thermostat faucet is the same as above in respect
of temperature adjustment.)
② A safety button is provided to avoid hot water spraying out
due to misoperation. The temperature-adjusting handle is fixed
around "40". If high-temperature water outlet is wanted
(greater than 40℃ ), it is imperative to press the safety button
and rotate the handle simultaneously.
Attention: After using, it is imperative to have the handle return
to a level below 40 to avoid scalding when using next time.
③ When, taking the switching faucet as an example, matching
with a fixed water outlet and a fixed shower, water will come out
from the water outlet when the switching handle is turned
leftward to position "1" and water will come out from the fixed
shower when it is turned rightward to position "2". When the
above rotation reaches the limit position, the water outlet
amount is maximal. To stop water outlet, please rotate the open
and close switching handle rod to the central position.
Attention: After using, it is imperative to have the handle return
to a level below 40 to avoid scalding when using next time.
6
Advertisement
