Table of Contents
Advertisement
Temperature Adjustment
Three diff erent temperature levels (high / medium / low) and "OFF" setting can be made.
Displaying the temperature level of
the pressed button
Drying air temperature*
(When you want to adjust the drying air temperature)
Adjusting the temperature
1
Select a temperature button you want to set from
*
·
·
and press it.
• The current temperature level appears.
2
Press the button selected in step
until a desired temperature level lights up.
The setting changes each time the button is pressed once
OFF
LOW
OFF
The "DRYER"* cannot be turned "OFF".
<Setting complete>
Note
• If the button is not pressed for about 10 seconds, the temperature adjustment LED will go off , but the setting
will be retained.
If the temperature adjustment LED goes out before the setting is completed, start all over again at step 1.
• When the toilet seat does not get warm, or when the warm water is not warm enough, even after temperature adjustment.
➞Is the energy saver set to "ON"? (Page 20)
18
*
Except SW2014
Warm Water / Toilet Seat / Drying *
Toilet seat temperature
(When you want to adjust the toilet seat temperature)
Warm water temperature
(When you want to adjust the warm water temperature)
When temperature is set
Lit
1
repeatedly
MEDIUM
HIGH
Lit
Lit
To turn the warm water temperature and toilet seat temperature "OFF"
*The "DRYER" cannot be turned "OFF".
1
Select a temperature button you want to turn "OFF" from
·
• The current temperature level appears.
2
Press the button selected in step
until the temperature level is set to "OFF".
When "OFF" is set, the LED will go off .
The setting changes each time the button is pressed once
OFF
Lit
OFF
<Setting complete>
When "OFF"
OFF
and press it.
1
repeatedly
LOW
MEDIUM
Lit
Lit
HIGH
Lit
19
Advertisement
Table of Contents
