Table of Contents
Advertisement
9 Appendix: SS-015 Registers
The following Appendix provides the registers and list index for the Layer N SS-015 Smart Sensor. This information is
intended to aid users who will be making configurations and adjustments to their Layer N SS-015 Smart Sensor through the
Command Line Interface or other custom interfaces.
The SS-015 radio or USB interface accesses the onboard Smart Sensor core device which provides interfaces to the external
process and/or digital pulse signals. The Smart Sensor core manages these interfaces and presents a set of register mapped
values. Refer to the Smart Sensor Interface specification for a complete description of the smart sensor register space.
9.1
Power Monitoring
The SS-015 monitors the current drawn on the M12.5 pin 1 and if an overcurrent condition is detected will shut
down the external power, wait for 2 seconds, and then attempt to repower the external device.
Exceed
Current ?
Power Okay
9.2
Password Security
Smart Sensor devices provide a password mechanism to ensure that log data cannot be accessed without
permission.
When a password is set in the Device Settings Tab, upon power cycling the device, SYNC will notify the
user that the device is password locked. Right click the device to login.
9.3
Extension Data Interface
The SS-015 platform includes the following Extension data I2C register address 0x0c00 – 0x0cff, when accessed by
the connected radio device, or Modbus address 0xf600 – 0xf67f when access through the USB connector. The
description strings are null-terminated text strings describing the parameter values. The register set is an expansion
from the registers found in Legacy SS-001/002 products, with the addition of a Control register that allows
configuration information for the radio subsystem to be programmed.
Turn Off Power
Wait 2 seconds
Apply Power
22 |
P a g e
Advertisement
Table of Contents
