Yaesu ADMS-8 Operation Manual page 35

Troubleshooting
The FT2DR/DE cannot receive or transmit data to the computer.
The Data transfer does not start.
• Verify that the programming cable is correctly connected to the FT2DR/DE data port and to the
Computer.
• The battery of the FT2DR/DE may be depleted.
Charge the battery or replace the battery with the new one.
• Is the computer COM Port setting correct?
Set the COM Port correctly.
The data transmission has stopped before completion.
• Disconnecting the connection cable or poor contact of the connection cable.
Confirm the cable connection and try again.
• The battery of the FT2DR/DE may be depleted.
Charge the battery or replace the battery with the new one.
The data import/export is not successful.
• Adjust the number of the rows of CSV file.
• Use the designated letter for the character string
• When importing and exporting channels such as memory channels and VFO channels, make sure
that the template files are consistent. If the template files are different, an error will occur and the
data import and export will not be successful.
Contact YAESU Technical Support
For the latest information about YAESU products visit http://www.yaesu.com
For Technical Support or Customer Service call, (714)827-7600 between 8AM – 5PM PST
35