Communications; Get Data From Ft2D - Yaesu ADMS-8 Operation Manual

Communications

Get Data from FT2D

This command transfers the settings data of the FT2DR/DE to the ADMS-8 programmer. To
communicate with the FT2DR/DE and create a new data file, click the left mouse button on the "Get
Data from FT2D" parameter in the "Communications" menu. The "Get Data From FT2D" window will
open.
Connect the supplied SCU-19 or SCU-16 programming cable between the FT2DR/DE and the
Personal Computer.
Follow the on-screen instructions to acquire data from the FT2DR/DE. When the data transfer is
completed, the template screen received from the FT2DR/DE appears on the computer display. The
memory channels and configuration menu data may be edited using the ADMS-8 software tools.
This template and configuration data may be saved to the computer hard drive, using the "Save" or
"Save as" commands in the "File" menu.
14