Table of Contents
Advertisement
Memory
The settings related to the memory and memory bank functions of the FT2DR/DE may be configured
with the programming software.
Refer to the "FT2DR/DE Operating Manual" for the details of each function.
When you have completed editing the settings of the Menu Setting window, click the left mouse
button on the "X" icon at the upper right corner of the window. A confirmation window will open, click
the left mouse button on the [OK] button to save the settings and close the window.
Tool Bar
Click the left mouse button on the "Toolbar" parameter in the "Setting" menu to display or hide the
Toolbar. The toolbar includes buttons for some of the most often used commands in the ADMS-8
programmer. A check mark appears next to the "Toolbar" parameter when the Toolbar is displayed.
Status Bar
Click the left mouse button on the "Status Bar" parameter in the "Setting" menu to display or hide the
Status Bar. The "Status Bar" describes the action to be executed by the selected menu item, or the
depressed toolbar button, and keyboard latch state. A check mark appears next to the "Status Bar"
parameter when the Status Bar is displayed.
21
Advertisement
Table of Contents
