Receive Frequency / Transmit Frequency; Operating Mode; Comment - Yaesu ADMS-8 Operation Manual

Descriptions for each item are as follows. Items other than the following are the same as those of
"Memories". See "Memories" (Page 24).

Receive Frequency / Transmit Frequency

Enter any desired changes into Home Channel frequency. The FT2DR/DE default Frequencies are
pre-entered into the ADMS-8 standard template.
A frequency that is out of transceiver's range cannot be entered. When the error pop-up window is
opened, enter the correct frequency.

Operating MODE

Select the operating mode for the receive channels:
When entering a receive frequency, this item automatically selects the operating mode that is most
suitable for the frequency.
The AM and FM broadcast radio frequency ranges are automatically set by default and are not
changeable.
• FM
Use for normal bandwidth ham radio and advisory radio.
• AM
Use this mode for receiving the Air band radio, etc.
• NFM
Use for narrow bandwidth ham radio and advisory radio.
• WFM
Use for FM broadcasting.

Comment

Comments may be added to the edited HOME channels. Up to 255 letters can be used.
This function is useful in organizing the HOME channels by, for example, applying a category name
to each channel.
These comments are not transferred to the FT2DR/DE.
31