Print; End; Edit; Undo - Yaesu ADMS-8 Operation Manual

Print

To print the current template file data to hard copy, click the left mouse button on the "Print"
parameter in the "File" menu, the "Print" window will open to enable printing. Set the start line and the
end line of the data you want to print, and then click the left mouse button on the "Printing" button to
start printing.
To change the specific printer settings, go to the Printer properties by clicking the left mouse button
on the "Printer setup" button.

End

To exit the ADMS-8 programmer, click the left mouse button on the "End" parameter in the "File"
menu to close the ADMS-8 software. If the following pop-up screen appears to confirm saving, follow
the on-screen instruction to select the desired button and close the ADMS-8 software.

Edit

Undo

To undo the edited data, click the left mouse button on the "Undo" parameter in the "Edit" menu.

Cut

To cut the data of the selected area, click the left mouse button on the "Cut" parameter in the "Edit"
menu.

Copy

To copy the data of the selected area to the clipboard, click the left mouse button on the "Copy"
parameter in the "Edit" menu.

Paste

To paste the clipboard data to the selected area, click the left mouse button on the "Paste" parameter
in the "Edit" menu.
10