B&D Auto-Lock Kit Installation Instructions

Auto-Lock Contents
GARAGE DOOR LOCK - ORDER NO. 100040
ITEM DESCRIPTION
1 GARAGE DOOR LOCK
2 COUNTERSUNK HEAD SCREW ZN M6 X 14
3 TAPTITE "P" BLACK SCREW M3 X 12
4 BATTERY C-LR14
5 WIRELESS BASESTATION MODULE
6 DRILLING TEMPLATE LABEL
WARNING! Ensure the opener is not engaged
when the Auto-lock is being used with only the
bolt unit. Failure to do so may void the warranty
of the opener.
CAUTION:
Ensure bolt on Auto-lock is free to move
during limit setup.
WARNING! This lock has been designed to work with B&D sectional overhead garage doors.
If you fit this lock to other branded garage door, we cannot guarantee the performance of the lock and
any performance warranties will not apply. This is subject to any Statutory Guarantees that may apply. Please refer
to our warranty terms and conditions set out in the Openers Manual.
This device will slide a bolt into the
guide track automatically when
the door is closed. DO NOT install in
garages that have only one exit.
For emergency lock / unlock press the lock / unlock
button on the Auto-Lock. This will disengage the lock
from the guide track and allow you to disengage the
opener and open the door. The lock will automatically
re-engage after the next complete cycle.
Important Safety Instructions
WARNING!
CAUTION:
Burns
Muscle strain
Doc # 161074_01
Released 28/09/21
Auto-Lock Kit
For B&D Sectional Doors.
Any other brand of doors, please consult your B&D approved distributor.
QTY
1
2
4
2
1
1
• DO NOT attempt to disassemble, repair or modify the product.
This will invalidate the warranty.
• DO NOT allow children to play with the Auto-Lock.
• DO NOT install in garages that have only one exit.
• DO NOT cover, paint or lubricate the product.
• DO NOT handle damaged or leaking batteries
• The Auto-Lock Kit contains sealed lead-acid batteries that must
be disposed of properly at the end of their useful life.
• DO NOT attempt to lift the door manually when the Auto-lock is
engaged.
These instructions are intended for professional garage door installers.
B&D encourages recycling of packaging as is reduces waste to landfill
and achieves environmental benefits.
Bracket Kit
(Kit sold separately)
DOOR BRACKET KITS
ITEM STRIKER BRACKET FOR DOOR:
7 PANELIFT, PANELIFT GEN II, PANELIFT ICON,
PANELMASTA, FIRMAPANEL, P7,
DESIGN-A-DOOR, ENVIROPANEL,
SMOOTHPANEL & TOUGHPANEL
8 STORMSHIELD
9 TONGUE AND GROOVE
FASTENER PACK
ITEM DESCRIPTION
10 FLANGE HEAD TEK SCREWS 20 X 25 CL4
11 MUSHROOM HEAD BOLTS
12 FLANGE NUT / "
1
4
It is our strong recommendation that
your opener be fitted with SAFETY
BEAMS.
Safety Beams detect any obstructions in the door/
gate's path and override automatic operation
if one presents. These must be installed as in
accordance with AS/NZS 60335-2-95:2020.
KIT
MC0104
MC0105
MC0106
QTY
4
/ " - 20 X / " 3
1 1
4 2
3