Table of Contents Table of Contents Your TS3-16 at a glance Key Features Safety Signal word panel Safety alert symbol Pictograms Product modification Power supply Storage and Installation Getting Started Opening your product What's Included Connecting to the mains ﺑﺎﻟﻤﻀﻴﻒ...
(. أ almost any device to be charged at its optimum rate (up to 2.4 to ensure the TS3-16 can charge the latest devices. It is ready to charge out-of-the-box and to sync devices when attached to a host computer When a local (host) computer is attached the host can control the operation of each individual port using software provided by Cambrionix.
This manual has been arranged to follow IEC/ICEE 82079-1 standards. This is to facilitate the easier understanding and location of information relating to the TS3-16. Any errors or omissions can be reported back using our support ticket system (see"Help and Support") this...
Read operating instructions Product modification Cambrionix products are designed and manufactured to meet the requirements of UK and International safety regulations. Modifications to the product could affect safety and render the product non-compliant to relevant safety standards, which could result in injury or damage to the product اﻟﺤﺬر...
Do not allow liquids to come into contact with the unit or power supply اﻟﺤﺬر Damage to your product may occur Do not short circuit the Power Supply Unit (PSU) supplied with your product Do not disconnect the power cord while the product is being used ﻣﻦ ﺻﻔﺤﺔ TS3-16...
Do not place the power cord near heat sources Connect the plug to an earthed socket اﻟﺤﺬر Damage to your Cambrionix product may occur Operate the product only in an environment where the ambient temperature is inside the operating temperature range...
As well as a guide for product safety-related information The TS3-16 is intended to be used in an indoor static environment in which the environment falls within the tested specifications to provide charge, sync and management functionality. For...
Periodic inspection should be made to power supply cables and any USB cables for any signs of damage. If any damage is found then replace damaged cord before further use ﺑﺎﻟﻤﻀﻴﻒ اﻻﺗﺼﺎل Once the power is connected connect the TS3-16 to your host system using a Thunderbolt™ 3 ﻗﺒﻞ ﻣﻦ اﻟﻼﺣﻘﺔ...
LED Configuration 5.0.1 Your TS3-16 has inbuilt LEDs used to show the state of the ports or devices. These LEDs can be configured to support your own use case, this can be controlled either by using the API to send commands directly or through separate software...
In order to transfer data, connect the host port to your local (host) computer using a Thunderbolt™ 3 compliant cable. Any devices connected to the hub will now appear as if they were connected to the host computer’s USB port ﻣﻦ ﺻﻔﺤﺔ TS3-16...
Thunderbolt™ port of theprevious hub to one of the ﻣﺤﺎور ﺳﺘﺔ رﺑﻂ ﻳﻤﻜﻦ ، اﻟﻨﻬﺞ ﻫﺬا ﺑﺎﺳﺘﺨﺪام Thunderbolt™ ports of the next device in the daisy-chain .واﺣﺪ ﻣﻀﻴﻒ ﻛﻤﺒﻴﻮﺗﺮ ﺟﻬﺎز ﻣﻦ ﻣﺰاﻣﻨﺘﻬﺎ اﻟﻤﺮاد اﻷﺟﻬﺰة ﺑﺈﺟﻤﺎﻟﻲ ﻳﺴﻤﺢ ﻣﻤﺎ ، ﻣ ﻌ ًﺎ أﻗﺼﻰ ﻛﺤﺪ ﻣﻦ ﺻﻔﺤﺔ TS3-16...
Manage Ports & Your TS3-16 Each port on your TS3-16 can be managed either individually or all together. You can turn the ports off and on, change the port mode or change the charging profiles. This can be done either...
Page 17
Once selected press the update button at the top and the update will commence اﻟﺤﺬر Your Cambrionix Firmware may get corrupted Do not interrupt the Firmware update process Do not disconnect the power during the update process ﻣﻦ...
The TS3-16 uses string commands to communicate with the host system. These can be sent via the virtual serial port of the TS3-16 directly, or the API can be used to provide other protocols that sends translated string commands. LiveViewer can use the API to interact with the devices through a user friendly application There are three different channels for both our LiveViewer application and the API.
، NVRAM Cambrionix API 5.5.3 Cambrionix API allows you to monitor and control each port in more detail and to integrate these functions into your own workflow processes. The API comprises a daemon that can be downloaded from www.cambrionix.com/products/api and installed on the host machine. Port information and control can be provided through the API using JavaScript Object Notation (JSON) Remote Procedure Calls (RPC) over TCP.
Removing Software 5.5.5 If you wish to uninstall the software (Cambrionix LiveViewer and Cambrionix API) from your host system this can be done by the following steps. One thing to note when removing the API is to check you have also removed the recorder service which will install alongside it Windows To remove the software from a windows system you can do so by going into "Add or remove...
Page 22
Examples include Serial, ZTerm, PuTTy, and Minicom. If you would like more information please look at our more in depth information here www.cambrionix.com/cli Two example commands can be seen below, you can use these commands to check hub information and health ﻣﻦ ﺻﻔﺤﺔ TS3-16...
Page 23
Action Command Show hardware and firmware information system Show voltages, temperatures, errors and boot health flag ﻣﻦ ﺻﻔﺤﺔ TS3-16...
Electric shock or personal injury may occur If there is a dirt/ spillage over a ventilation slot, external data/ power connector or product aperture, please remove power from the unit without touching the liquid and contact Cambrionix immediately أو اﻟﻘﺎﺑﺲ...
Troubleshooting If you experience any issues with your TS3-16 then please try the following solutions, if your issue is not addressed in this section then please contact your local vendor or Cambrionix Initial troubleshooting tips Some tips and information to check first...
Device connection If you are having device connection issues please read through the following common solutions to see if this resolves the behaviour you are observing ﻣﺴﺘﻘﺮ ﻏﻴﺮ ﺟﻬﺎز اﺗﺼﺎل ﻻﺣﻈﻨﺎ ﻟﻘﺪ TS3-16 ﺧﻼل ﻣﻦ ﺑﻚ اﻟﺨﺎص اﻟﻤﻀﻴﻒ اﻟﻨﻈﺎم ﻣﻊ ﻣﺴﺘﻘﺮة...
August 12, 2005, and should not be disposed of as unsorted municipal waste. Please utilize your local WEEE collection facilities in the disposition of this product and otherwise observe all applicable requirements ." Cambrionix PRN (Producer Registration Number) For the UK is "WEE/BH191TT ﻣﻦ ﺻﻔﺤﺔ TS3-16...
If you have not purchased the Product(s) direct from Cambrionix please contact the vendor the item was originally purchased from for their returns process Once you have notified Cambrionix of your return, Cambrionix will arrange for collection of the Product(s) or provide instructions and details for you to return the Product direct When returning your Product(s) please only send back the items that were advised...
Page 34
Where Cambrionix arranges collection, return shipping will be free, unless Cambrionix notified you otherwise When contacting us about returning a product please provide the following information Collection Address Weights and dimensions of shipment Preferred collection date and time ﻣﻦ ﺻﻔﺤﺔ...
Page 36
This manual may make reference to trademarks, registered trademarks, and other protected names and /or symbols of third-party companies not related in any way to Cambrionix. Where they occur these references are for illustrative purposes only and do not represent an...
Need help?
Do you have a question about the TS3-16 and is the answer not in the manual?
Questions and answers