GH: 1。 Table of Contents GH: 1。 Table of Contents GH: 1。 Your PP15C at a glance GH: 1。 Safety 0.1.Signal word panel 0.2.Safety alert symbol 0.3.Pictograms 0.4.Product modification 0.5.Power supply 0.6.Storage and Installation GH: 1。 Getting Started 0.7.Opening your product 0.8.What's Included...
Page 3
GH: 1。 Returns and Damaged Products 0.24.What do I do if my order arrives and something the product is faulty or is physically damaged? 0.25.What happens after I have requested a Return? GH: 1。 Compliance and Standards PP15C 2/23ページ...
(up to 2.1A).The firmware can be up-dated to allow new charging profiles to be added, ensuring the PP15C can charge the latest devices.It is ready to charge out-of-the-box and to sync devices when attached to a host computer.
This manual has been arranged to follow IEC/ICEE 82079-1 standards.This is to facilitate the easier understanding and location of information relating to the PP15C.Any errors or omissions can be reported back using our support ticket system (see"Help and Support") this way any issues can be collected and fixed.
Mandatory regulation 0.4.Product modification Cambrionix products are designed and manufactured to meet the requirements of UK and International safety regulations.Modifications to the product could affect safety and render the product non-compliant to relevant safety standards, which could result in injury or damage to the product.
Do not touch the power plug with wet hands Do not allow liquids to come into contact with the unit or power supply 注 意 Damage to your product may occur Do not short circuit the Power Supply Unit (PSU) supplied with your product PP15C 6/23ページ...
Page 8
Do not place the power cord near heat sources Connect the plug to an earthed socket 注 意 Damage to your Cambrionix product may occur Operate the product only in an environment where the ambient temperature is inside the operating temperature range...
This manual provides a reference for end-users who are installing for the first time and using their hub thereafter.As well as a guide for product safety-related information. The PP15C is intended to be used in an indoor static environment in which the environment falls within the tested specifications to provide charge, sync and management functionality.For information on the environment specifications please see the physical specifications section of this manual.
Device Information Plate which is either on the underside or back of the unit.Including serial and PO numbers can help identify the product in question faster and speed up the process. PP15C 9/23ページ...
In this section you can find information information on how to use your hub in a charge only or a charge and sync application.You can also find information on managing your hub and changing port modes, connecting multiple hubs to one host and using Cambrionix Software. GH: 0。 1。 Using without connecting to host When the Hub is switched on and is not connected to a local host computer it is automatically configured to charge devices using its intelligent charging algorithm.Simply...
GH: 0。 1。 Cleaning your PP15C Cleaning the product is generally not required, although in some instances it may be necessary if excess dirt/ dust/ hair has accumulated, or if minor liquid spillages have occurred on the module during operation or storage.
0.17.Power Supply Input Voltage 100-240VAC 4A @ 115VAC Input Current (Typical) 2A @ 230VAC Input Frequency 50-60Hz Input Connector Output Voltage Output Current Output Power (Max) 180W Output Connector 4-pin DIN Dimensions 210 x 85 x 46mm PP15C 14/23ページ...
GH: 1。 Troubleshooting If you experience any issues with your PP15C then please try the following solutions, if your issue is not addressed in this section then please contact your local vendor or Cambrionix. 0.18.Initial troubleshooting tips Some tips and information to check first.
If you are having device connection issues please read through the following common solutions to see if this resolves the behaviour you are observing. 不 安 定 なデバイス接 続 一部のデバイスは、 を介 してホスト システムと不 安定な接続を持 つ可能 性がありますPP15C 。 この動作は非常に小さなデバイスでのみ観 察 されており、 CDPを無効 にすることですべての問 題が解 決 され、 接 続は安定 しています。...
If you are having issues with the hub and connecting to your host system please see below toubleshooting solutions. ハブがホスト に接 続 していません あなたがそれを見ているならPP15Cがホスト システムに接続していない場合 、 問 題 の1つは、 ホ スト システムのUSBドライバが最 新でないことが原 因 である可能性があります。 ホスト システム に最 新のドライバーと更新プログラムがインスト ールされていることを確 認することをお勧めしま...
If you are using a headless system with no GUI then and you require to enable logging for support issues you can use the following command to create the logging cfg file manually: echo *=DEBUG>/etc/opt/cambrionix/cambrionix.log.cfg Then after re-producing the problem, you can zip the logs from the folder /var/log/cambrionix You may delete the file below when you are finished with it.
August 12, 2005, and should not be disposed of as unsorted municipal waste.Please utilize your local WEEE collection facilities in the disposition of this product and otherwise observe all applicable requirements. Cambrionix PRN (Producer Registration Number) For the UK is "WEE/BH191TT". PP15C 19/23ページ...
Page 21
If you have not purchased the Product(s) direct from Cambrionix please contact the vendor the item was originally purchased from for their returns process. Once you have notified Cambrionix of your return, Cambrionix will arrange for collection of the Product(s) or provide instructions and details for you to return the Product direct.
Page 22
Where Cambrionix arranges collection, return shipping will be free, unless Cambrionix notified you otherwise. When contacting us about returning a product please provide the following information. - Collection Address - Weights and dimensions of shipment - Preferred collection date and time.
Page 24
/or symbols of third-party companies not related in any way to Cambrionix.Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by Cambrionix, or an endorsement of the product(s) to which this manual applies by the third-party company in question.