Safety alert symbol Pictograms Product modification Power supply Storage and Installation Getting Started Opening your product What's Included Connecting to the mains Registration ﺑﻮس Cleaning your ModIT Installing Host System Product Specifications اﻹدﺧﺎل ﻃﺎﻗﺔ ﻣﺘﻄﻠﺒﺎت اﻟﻤﺎدﻳﺔ اﻟﻤﻮاﺻﻔﺎت اﻟﻤﻌﺒﺄة اﻟﻤﻌﻠﻮﻣﺎت اﻷواﻣﺮ...
This manual has been arranged to follow IEC/ICEE 82079-1 standards. This is to facilitate the Any errors or ﺑﻮس easier understanding and location of information relating to the ModIT omissions can be reported back using our support ticket system (see"Help and Support") this way any issues can be collected and fixed Understanding and observing the instructions in this user manual are prerequisites for hazard-free use and safety during operation.
Read operating instructions Product modification Cambrionix products are designed and manufactured to meet the requirements of UK and International safety regulations. Modifications to the product could affect safety and render the product non-compliant to relevant safety standards, which could result in injury or damage to the product اﻟﺤﺬر...
Do not allow liquids to come into contact with the unit or power supply اﻟﺤﺬر Damage to your product may occur Do not short circuit the Power Supply Unit (PSU) supplied with your product Do not disconnect the power cord while the product is being used ﻣﻦ ﺻﻔﺤﺔ ﺑﻮس ModIT...
Do not place the power cord near heat sources Connect the plug to an earthed socket اﻟﺤﺬر Damage to your Cambrionix product may occur Operate the product only in an environment where the ambient temperature is inside the operating temperature range...
As well as a guide for product safety-related information is intended to be used in an indoor static environment in which the ﺑﻮس The ModIT environment falls within the tested specifications to provide charge, sync and management functionality. For information on the environment specifications please see the physical...
Please note that USB specifications require a minimum 100 mA charge current to be delivered during data transfer. As indicated in above, if the attached device has a BC1.2 compliant CDP port, the device can draw up to while transferring data Registration You may register your product at www.cambrionix.com/product-registration ﻣﻦ ﺻﻔﺤﺔ ﺑﻮس ModIT...
Electric shock or personal injury may occur If there is a dirt/ spillage over a ventilation slot, external data/ power connector or product aperture, please remove power from the unit without touching the liquid and contact Cambrionix immediately أو اﻟﻘﺎﺑﺲ...
Remove these using a screwdriver and slide the top of the Boss Module 4 inches, as demonstrated in the in the graphic below The graphic below demonstrates how the product should look at this stage. Notice the highlighted yellow screws, which should all have been removed at this point ﻣﻦ ﺻﻔﺤﺔ ﺑﻮس ModIT...
Page 11
(highlighted in yellow) in order to remove the Mac mini chassis Once you have removed the Mac mini chassis place your Mac mini on the circular mat outsides highlighted below). You can then attach the mini Mac® to the three wires on the left ﻣﻦ ﺻﻔﺤﺔ ﺑﻮس ModIT...
Page 12
Once the Mac mini is securely, reattach the Mac mini chassis. and the side panels in the same order that they were removed You have now successfully installed your Mac mini into the Boss Module ﻣﻦ ﺻﻔﺤﺔ ﺑﻮس ModIT...
August 12, 2005, and should not be disposed of as unsorted municipal waste. Please utilize your local WEEE collection facilities in the disposition of this product and otherwise observe all applicable requirements ." Cambrionix PRN (Producer Registration Number) For the UK is "WEE/BH191TT ﻣﻦ ﺻﻔﺤﺔ ﺑﻮس ModIT...
If you have not purchased the Product(s) direct from Cambrionix please contact the vendor the item was originally purchased from for their returns process Once you have notified Cambrionix of your return, Cambrionix will arrange for collection of the Product(s) or provide instructions and details for you to return the Product direct When returning your Product(s) please only send back the items that were advised...
Page 18
Where Cambrionix arranges collection, return shipping will be free, unless Cambrionix notified you otherwise When contacting us about returning a product please provide the following information Collection Address Weights and dimensions of shipment Preferred collection date and time ﻣﻦ ﺻﻔﺤﺔ...
Page 20
This manual may make reference to trademarks, registered trademarks, and other protected names and /or symbols of third-party companies not related in any way to Cambrionix. Where they occur these references are for illustrative purposes only and do not represent an...
Need help?
Do you have a question about the ModIT and is the answer not in the manual?
Questions and answers