3. Getting Started 3.1. Opening your product 3.2. What's Included 3.3. Connecting to the mains 3.4. Registration 3.5. Cleaning your ModIT-Boss 4. Installing Host System 5. Product Specifications 5.1. Requisitos de la alimentación entrante 5.2. Especificaciones físicas 5.3. Información empaquetada 5.4.
This manual has been arranged to follow IEC/ICEE 82079-1 standards. This is to facilitate the easier understanding and location of information relating to the ModIT-Boss. Any errors or omissions can be reported back using our support ticket system (see"Help and Support") this way any issues can be collected and fixed.
Mandatory regulation 2.4. Product modification Cambrionix products are designed and manufactured to meet the requirements of UK and International safety regulations. Modifications to the product could affect safety and render the product non-compliant to relevant safety standards, which could result in injury or damage to the product.
Do not touch the power plug with wet hands Do not allow liquids to come into contact with the unit or power supply PRECAUCIÓN Damage to your product may occur Do not short circuit the Power Supply Unit (PSU) supplied with your product ModIT-Boss Página 5 de 21...
Do not place the power cord near heat sources Connect the plug to an earthed socket PRECAUCIÓN Damage to your Cambrionix product may occur Operate the product only in an environment where the ambient temperature is inside the operating temperature range...
This manual provides a reference for end-users who are installing for the first time and using their hub thereafter. As well as a guide for product safety-related information. The ModIT-Boss is intended to be used in an indoor static environment in which the environment falls within the tested specifications to provide charge, sync and management functionality.
As indicated in above, if the attached device has a BC1.2 compliant CDP port, the device can draw up to while transferring data. 3.4. Registration You may register your product at www.cambrionix.com/product-registration ModIT-Boss Página 8 de 21...
If there is a dirt/ spillage over a ventilation slot, external data/ power connector or product aperture, please remove power from the unit without touching the liquid and contact Cambrionix immediately Asegúrese de que el producto esté apagado y de que el cable de alimentación se haya desconectado del producto.
Remove these using a screwdriver and slide the top of the Boss Module 4 inches, as demonstrated in the in the graphic below. The graphic below demonstrates how the product should look at this stage. Notice the highlighted yellow screws, which should all have been removed at this point ModIT-Boss Página 10 de 21...
Page 11
(highlighted in yellow) in order to remove the Mac mini chassis. Once you have removed the Mac mini chassis place your Mac mini on the circular mat (outsides highlighted below). You can then attach the mini Mac® to the three wires on the left. ModIT-Boss Página 11 de 21...
Page 12
Once the Mac mini is securely, reattach the Mac mini chassis. and the side panels in the same order that they were removed. You have now successfully installed your Mac mini into the Boss Module. ModIT-Boss Página 12 de 21...
0,57 x 0,19 x 0,57 m 5.4. Consumibles y realización de pedidos A continuación, se muestra una lista de los productos consumibles que puede necesitar para su ModIT-Boss, incluidos los cables que necesitará para conectar los dispositivos al hub. Fusibles T3.15A 250V...
Page 14
(disponible en la sección de lo que se incluye) Estos se pueden pedir al distribuidor o socio de soluciones que compró su ModIT-Boss desde, o desde Cambrionix directamente.
August 12, 2005, and should not be disposed of as unsorted municipal waste. Please utilize your local WEEE collection facilities in the disposition of this product and otherwise observe all applicable requirements. Cambrionix PRN (Producer Registration Number) For the UK is "WEE/BH191TT". ModIT-Boss Página 16 de 21...
If you have not purchased the Product(s) direct from Cambrionix please contact the vendor the item was originally purchased from for their returns process. Once you have notified Cambrionix of your return, Cambrionix will arrange for collection of the Product(s) or provide instructions and details for you to return the Product direct.
Page 18
Where Cambrionix arranges collection, return shipping will be free, unless Cambrionix notified you otherwise. When contacting us about returning a product please provide the following information. - Collection Address - Weights and dimensions of shipment - Preferred collection date and time.
Probado y marcado según la Parte 15 de la FCC Alojado en una envolvente a prueba de incendios de la especificación UL94-VO Cumplimiento de RoHS Probado independientemente por Underwriters Laboratory (UL) con el número de expediente #E346549 ModIT-Boss Página 19 de 21...
Page 20
This manual may make reference to trademarks, registered trademarks, and other protected names and /or symbols of third-party companies not related in any way to Cambrionix. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by Cambrionix, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
Need help?
Do you have a question about the ModIT-Boss and is the answer not in the manual?
Questions and answers