Location And Function Of Parts And Controls . 4(E); Front - Sony TRINITRON BVM-14M4DJ Operation Manual

Location and Function of Parts and Controls

Front

@™ @¡ @º !ª
A/ B/ C/ LINE/
RGB COMPONENT SDI RGB
RESET
DEGAUSS BLUE UNDER H/V
ONLY SCAN DELAY
!¶ !§ !∞ !¢
1 Tally lamp
Lights up when the video camera connected to this
monitor is selected, indicating that the picture is being
recorded.
For details on how to light the tally lamp, see page 14(E).
2 POWER switch and indicator
Depress to turn on the monitor. The indicator will light
green.
3 REMOTE indicator
Lights up when you select ON on the USER PRESET
menu (see page 11(E)), or when you connect a
supplied cable to the REMOTE connector. The
controls on the front panel do not work when this
indicator lights up.
For details on how to connect the cable, see page 14(E).
4 VOLUME control
Turn this control clockwise or counterclockwise to
obtain the desired volume.
4(E)
!•
EXT
SYNC MENU
APERTURE BRIGHT
E X I T
SELECT
–
MIN MAX
16:9
ENTER
!£ !™ !¡ 0 9 8
5 CONTRAST control
Turn this control clockwise to make the contrast higher
or counterclockwise to make it lower.
6 PHASE control
This control is effective only for the NTSC and
NTSC
skin tones greenish or counterclockwise to make them
purplish.
7 CHROMA control
Turn this control clockwise to increase the color
intensity or counterclockwise to decrease it.
8 BRIGHT (brightness) control
Turn this control clockwise to increase the brightness
or counterclockwise to decrease it.
9 APERTURE control
Turn this control clockwise to increase sharpness or
counterclockwise to decrease sharpness.
2/01-15_BVM-14M4DE 3-860-496-01 (1) (J/E)
1
CHROMA PHASE CONTRAST VOLUME
+ MIN MAX PUR GRN MIN MAX MIN MAX
7 6 5 4
color systems. Turn it clockwise to make the
4.43
POWER
REMOTE
3 2