Rear Panel - Sony TRINITRON BVM-14M4DJ Operation Manual

Hide thumbs Also See for TRINITRON BVM-14M4DJ:
Table of Contents

Advertisement

Location and Function of Parts and Controls

Rear Panel

(The
mark indicates automatic termination.)
1 AC IN socket
Connect the supplied AC power cord to this socket and
to a wall outlet.
2 LINE A, LINE B connectors
Two groups (A and B) of line input connectors for the
composite video and audio signals and their loop-
through output connectors.
To monitor the input signal through these connectors,
set the LINE/RGB selector to the LINE position (light
off) and press the A/RGB or B/COMPONENT selector
(light on).
VIDEO IN (BNC)
Connect to the video output of video equipment, such
as a VCR or a color video camera.
For a loop-through connection, connect to the video
output of another monitor.
VIDEO OUT (BNC)
Loop-through output of the VIDEO IN connector.
Connect to the video input of a VCR or another
monitor.
When the cable is connected to this connector, the
75-ohm termination of the input is automatically
released, and the signal input to the VIDEO IN
connector is output from this connector.
6(E)
1
2
3
LINE A
LINE B
LINE C
AC IN
VIDEO
VIDEO
IN
IN
OUT
IN
OUT
AUDIO
AUDIO
AUDIO
IN
OUT
IN
OUT
IN
IN
OUT
IN
OUT
IN
R/R–Y
G/Y
B/B–Y
RGB/COMPONENT
5
AUDIO IN (phono jack)
Connect to the audio output of a VCR or to a
microphone via a suitable microphone amplifier.
For a loop-through connection, connect to the audio
output of another monitor.
AUDIO OUT (phono jack)
Loop-through output of the AUDIO IN connector.
Connect to the audio input of a VCR or another
monitor.
3 LINE C connectors
Y/C IN (4-pin mini-DIN)
Connect to the Y/C separate output of a video camera,
VCR or other video equipment.
For a loop-through connection, connect to the Y/C
separate output of a VCR or another monitor.
Y/C OUT (4-pin mini-DIN)
Loop-through output of the Y/C IN connector.
Connect to the Y/C separate input of a VCR or another
monitor.
When the cable is connected to this connector, the 75-
ohm termination of the input is automatically released,
and the signal input to the Y/C IN connector is output
from this connector.
2/01-15_BVM-14M4DE 3-860-496-01 (1) (J/E)
COMPONENT SDI
IN
OUT
ACTIVE THROUGH
7
4
OUT
REMOTE
OUT
OUT
IN
OUT
IN
OUT
AUDIO
EXT SYNC
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trinitron bvm-14m4de

Table of Contents