R E E L Lock Lever Assembly; Pendulum Stopper Plate - Sony CCD-M8U Service Manual

2-3-2. Pendulum Stopper Plate

1 .
Removal
By referring to and
1 ) 2- 1 - 1
assembly and LS cassette compartment assembly.
By referring to remove reel lock lever assembly.
2) 2-3-1.
Push LED assembly
1
3)
remove claw
f) .
f) .
Remove screws
2
4)
Remove pendulum stopper plate
5)
of claws $ .
Note :
f)
As claw is easily broken, precaution should be taken in
installation and removal. (See Fig. 2-13)
2. I nstallation
Set in � , G _ U _ ID _ E_ L_ O _ A _ D __,! mode. and wind TG- 1 band
1)
assembly tightly to S reel.
0
O LED assembly
TG- 1
0
remove the cassette arm
2- 1 -2.
in the direction of arrow
Q .
0 from the positions
2
f) Cla w
band assembly
See to it that the LED assembly
2)
pendulum stopper plate
claw and positions of the dowel.
2
Install screws
2
3)
Hook claw
4) 0
in the direction of arrow
and
Set to I EJECT I mode.
5)
By referring to
6)
By referring to
7)
assembly and LS cassette compartment assembly.
Note:
Caution should be taken that the
not clasped in when installing the pendulum stopper plate.
@ Claw
Fig. 2- 13
-36-
is mounted on the
0
O . and fasten to positions of the
2
f) .
of LED assembly and insert by pushing
O .
© .
install the reel lock lever assembly.
2-3- 1 .
and install the cassette arm
2- 1 - 1 2- 1-2.
TG-1
band assembly
Pendulum stopper plate
Dowel
0
is