Table of Contents
Advertisement
Connecting an Apple Macintosh
To connect an Apple Macintosh with the TRITON, you
will need a separately sold AG-002B connecting kit
(cable and Korg MIDI Driver software).
Macintosh computers that do not have a serial port
(modem/printer) cannot be connected to the TO
HOST connector.
1 Use the special AG-002B cable to connect the
modem port or printer port of the Apple Macin-
tosh to the TRITON's TO HOST connector.
Apple Macintosh
Modem port or
printer port
Special cable (AG-002B)
If the application program (sequencer) you are
using has a Clock setting, set it to 1 MHz.
2 In Global P0: Basic Setup, set "PC I/F Baud Rate"
to 31.25 [kBPS]. (
"PC I/F Baud Rate settings")
3 If you will be installing the Korg MIDI Driver
(
p.131 "Installing the Korg MIDI Driver into a
Macintosh").
PC I/F Baud Rate settings
1 Press the [GLOBAL] key to enter Global mode.
2 Press the [MENU] key, and then press the [EXIT]
3 Press the System Pref. tab.
4 Press the "PC I/F Baud Rate" popup button, and
TO HOST
key to enter P0: Basic Setup.
select the setting that is appropriate for your com-
puter.
31.25 [kBPS]:
Connection to an Apple Macintosh.
34.80 [kBPS]:
Connection to an IBM PC (compatible).
113
Advertisement
Table of Contents
