Appendices; Installing And Setting Up The Korg Midi Driver; Installing The Korg Midi Driver Into Windows 95/98 And Making Settings; Installing The Korg Midi Driver Into - Korg Speaker System User Manual

Korg speaker system user manual
Table of Contents

Advertisement

Installing and setting up the Korg MIDI
Installing the Korg MIDI Driver
into Windows 95/98 and mak-
ing settings

Installing the Korg MIDI Driver into

Windows 95/98

If your application (sequencer) is Windows-compati-
ble, using the Korg MIDI Driver will allow you to use a
Korg tone generator connected to the serial port (COM,
RS-232C) as a MIDI device.
Before you install the Korg MIDI Driver, use the
special serial cable to connect the TRITON and
your computer, turn on the power of the TRITON,
and set the Global P0: System Pref. tab "PC I/F
Baud Rate" parameter to the setting appropriate
for your computer (
p.112, 113).
If your computer is not fast enough, the data at
MIDI IN may not be received correctly. Windows
NT is not supported.
1 In the task bar, click the [Start] button, and then
click [Control Panel].
2 In the control panel, double-click the "Hardware" or
"Add hardware" icon, and the "Hardware wizard"
will start up. On Windows 95 click [Next>]. On Win-
dows 98, click [Next>] and when an explanation
appears, click [Next>] once again.

Appendices

Driver
In response to "Do you want Windows to search for
your new hardware?" be sure to select "No," and
then click [Next>].
3 Select "Sound, video, and game controllers," and
click [Next>].
4 Click [Have Disk].
5 You will be asked for the drive and directory. Insert
the floppy disk containing the Korg PC I/F Driver
(AG-001B), and input the drive name.
For example if your floppy disk drive is A, type
"A:\".
129

Advertisement

Table of Contents
loading

Table of Contents